Can a polished floor’s appearance tell you how it performs when wet?
A glossy finish shows how a surface reflects light. It does not establish how that surface performs when wet. For an existing floor, testing under AS 4663:2013 provides slip resistance measurements at identified locations. Those results should be considered alongside surface conditions, cleaning practices and how the area is used.
Why shine is not a measure of slip resistance
The appearance of a floor can influence assumptions about its safety. A highly polished surface may be regarded as slippery, while a duller surface may attract less attention. Neither judgement provides a measurement of wet slip resistance.
Visual inspection remains useful. It can identify spills, visible wear, damaged flooring and water tracking beyond an entrance mat. However, these observations answer different questions from a slip resistance test. A floor’s appearance cannot replace measurements of its performance under defined conditions.
The same finish can present different concerns in different locations
Consider a foyer with polished stone extending from the entrance to the lifts. The area beside a planter and the turning point beyond the entrance mat may appear identical, but their exposure to water and pedestrian activity can differ considerably.
During wet weather, shoes and umbrellas may carry water beyond the mat onto the turning area. A sheltered section elsewhere in the foyer may remain dry. Even if both locations returned similar test results, the likelihood of water reaching each location would still matter when deciding how to manage them.
Test locations should therefore be selected with the use of the building in mind. A measurement from a quiet corner should not be assumed to represent every part of the floor simply because the finish looks the same.
What changes after cleaning, polishing or sealing?
Cleaning and maintenance can affect the condition of the surface people walk on. Products, application methods, residue removal and drying all deserve attention. Cleaning itself can also introduce a temporary hazard when pedestrians can access a floor that remains wet. www.hse.gov.uk
A concern raised after maintenance should prompt investigation, but the timing alone does not establish that the work caused a change in slip resistance. Record what was done, where it was done and when the area returned to use.
Useful information includes:
- The cleaning product, polish, sealer or treatment used.
- The application method and any dilution instructions.
- The areas treated and completion dates.
- Any specified curing, rinsing or drying requirements.
- Reports of changed conditions, including the precise location and whether the floor was wet.
These records help define what needs to be investigated and make later results easier to interpret.
Plan the testing question before the work begins
If the purpose is to assess whether a treatment changes wet slip resistance, discuss testing before the treatment is applied. Comparable measurements taken before and after the work can provide evidence of change. A measurement taken only afterwards describes the surface at the time of testing, but cannot establish how much it changed from an unmeasured starting point.
The comparison also needs suitable controls. Test locations, equipment and slider selection, surface preparation and timing should be discussed with the testing provider. Differences in these conditions can complicate interpretation.
Where a product requires curing before the floor returns to use, provide those instructions when arranging the visit. Testing should be planned around the question being investigated and the condition the surface is intended to reach.
Choose timing that suits the property’s use
A testing schedule should reflect the property’s conditions and use. When reviewing the schedule, facilities managers should consider previous findings, changes in traffic, visible wear, maintenance work, exposure to contamination and reported incidents. The time elapsed since the previous test is only part of that review.
Where a property is approaching a period of heavy use, testing may be needed early enough to allow findings to inform preparations. For buildings with seasonal closures or reduced occupancy, quieter periods can provide easier access to locations that are difficult to test during normal operations.
Convenient access should not determine timing on its own. If there is a current concern, that concern needs attention rather than being deferred simply to fit a future shutdown.
What does wet pendulum testing establish?
A wet pendulum test uses a rubber slider mounted on a swinging arm. The slider contacts a wetted surface over a defined path, producing a measurement of slip resistance under the test conditions.
AS 4663:2013 provides methods for measuring the frictional characteristics of existing pedestrian surfaces in wet and dry conditions. For a concern about wet performance, the test scope needs to address that condition. codehub.building.govt.nz
The result relates to the location and conditions tested. It does not reproduce every combination of footwear, contamination, movement or maintenance condition that pedestrians may encounter.
Testing under AS 4663:2013 also does not assign an existing floor a P classification under AS 4586:2013. NATA’s surface friction testing criteria explicitly distinguish existing-surface measurements from new-surface classifications. nata.com.au
Use the result alongside site observations
Before interpreting a number, check the location, surface description, test method and recorded conditions. Where surface preparation has occurred, that information matters to understanding what was measured.
Then consider what happens in that area during normal operation. Does water extend beyond the entrance mat? Are spills promptly removed? Can pedestrians enter before a cleaned floor has dried? Measurements and operational observations together provide a more useful basis for managing the area than appearance alone.
FREQUENTLY ASKED QUESTIONS
Common Questions About Slip Resistance Testing
Is a shiny floor necessarily slippery?
No. Gloss alone cannot establish wet slip resistance. It describes an aspect of appearance, while slip resistance testing measures performance under defined conditions. A visibly dull floor should not automatically be assumed to provide better wet slip resistance than a glossy one.
Should testing take place before or after a floor treatment?
That depends on the purpose. Testing after treatment measures the resulting surface under the test conditions. If the aim is to assess change, comparable measurements before and after the work are more useful. Discuss the scope before maintenance begins so the opportunity to establish a baseline is not lost.
Can a result from one part of a foyer represent the whole floor?
A result should be read in relation to the location tested. Similar-looking areas may have different wear, treatments or maintenance histories. Selecting representative locations requires consideration of the surface and its use, including entrances, turning points and areas exposed to water.
Planning floor maintenance or investigating wet slip resistance?
Contact Zerofal to discuss testing under AS 4663:2013, including whether a before-and-after assessment would be useful.
Explore more

Can a polished floor’s appearance tell you how it performs when wet?
A polished floor’s shine does not establish its wet slip resistance. Learn what to check after cleaning or treatment and how to plan testing around the property’s use.

Does a tile’s P rating apply to the floor after installation?
A supplier’s P rating describes the new tile tested. Learn how to check that the report matches the finish installed, and what evidence you need once the floor is in

How Product Testing Reduces the Risk of Unsuitable Surfaces Being Installed in Wet Areas
Product evidence can fail through the wrong test method, the wrong sample or the wrong application. Learn how laboratory testing supports better wet-area surface selection before installation.